Changing the port number of the web interface
Changing the port number of the web interface
3 July 2024
ID 255904
You can change the port number of the web interface of the Control node or Secondary node in the cluster. Changing the port number of the web interface for an individual node does not affect other nodes or the whole cluster.
To change the port of a cluster node's web interface:
- Run the cluster node network settings modification wizard:
/opt/kaspersky/ksmg/bin/setup.py --update-address
- Give the following responses to the wizard's prompts:
- To the Before changing network settings of a cluster node, you must ensure network connectivity between nodes with new and old addresses. Continue? prompt, answer
yes
. - To the Specify IP address of the current node prompt, press ENTER.
- To the Specify the port number of the current node prompt, press ENTER.
- To the Specify the port number of the current node for web interface prompt, enter the new port number of the web interface and press ENTER.
- To the Before changing network settings of a cluster node, you must ensure network connectivity between nodes with new and old addresses. Continue? prompt, answer
After the wizard finishes and all services are restarted, the cluster node web interface is ready for use on the new port.
You can test the availability of the web interface at https://<IP address of fully qualified domain name (FQDN) of the Control node>:<new port for connecting to the web interface>
.
Did you find this article helpful?
What can we do better?
Thank you for your feedback! You're helping us improve.
Thank you for your feedback! You're helping us improve.