Managing VRRP instances

The table of VRRP instances is displayed in the CPE template and on the device:

• To display the table of VRRP instances in a CPE template, go to the SD-WAN → CPE templates menu section, click the template, and in the displayed settings area, select the VRRP → VRRP instances tab.
• To display the table of VRRP instances on a CPE device, go to the SD-WAN → CPE menu section, click the device, and in the displayed settings area, select the VRRP → VRRP instances tab.

Information about VRRP instances is displayed in the following table columns:

• Name is the name of the VRRP instance.
• VRID is the virtual router ID.
• Interface is the network interface added to the virtual router.
• VIP is the virtual IP address assigned to the network interface.
• State is the role of the network interface:
  • Backup is the backup network interface.
  • Master is the primary network interface.
• Priority is the priority of the network interface. The greater the value, the higher the priority. When the primary network interface fails, it is replaced by the backup network interface with the highest priority. If, when selecting the new primary network interface, all backup network interfaces have the same priority, the new primary network interface is selected at random.
• Advertise interval (sec.) is the interval in seconds for sending control packets from a network interface to other network interfaces.
• Nopreempt specifies whether the role of the network interface that became the primary network interface must be changed if the previous primary network interface recovers:
  • Yes
  • No
• Management contains the actions that can be performed with the VRRP instance.