Manually registering a CPE device

You must manually register the CPE device in the web interface when re-registering the device. When registering, you do not need to connect to Kaspersky cloud services.

To manually register a CPE device:

1. In the menu, go to the SD-WAN → CPE section.

   A table of CPE devices is displayed.

2. Click the CPE device that you want to manually register.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand icon . By default, the Configuration tab is selected, which displays general information about the CPE device. This tab also displays the table of Out-of-band management tasks being performed by the orchestrator.

3. In the upper part of the settings area, under Actions, click Register.
4. This opens a window; in that window, in the State drop-down list, select the device state after registration:
   • Activated to apply a CPE template to the device and use it to relay traffic. Default value.
   • Deactivated to not apply a CPE template to the device.
5. If necessary, enter a brief description of the device in the Description field.
6. In the Tenant drop-down list, select a previously created tenant to which you want to assign the device. You can select a pool of SD-WAN instances or an individual instance from the pool.
7. If necessary, in the Customer tenant drop-down list, select a tenant for your client's organization.
8. If you want to create a UNI on the CPE device using a UNI template, in the UNI template drop-down list, select a previously created UNI template.
9. In the CPE template drop-down list, select the previously created CPE template which you want to use to configure the CPE device.
10. In the NetFlow template drop-down list, select the previously created NetFlow template that you want to use to configure basic NetFlow settings on the CPE device.
11. In the Firewall template drop-down list, select the previously created firewall template which you want to use to configure the firewall of the CPE device.
12. Click Next and specify the address of the CPE device location in the Address field. As you enter the address, you are prompted to select an address from a drop-down list.

    The address is displayed on the map.

13. Click Register.

The CPE device status changes first to Registering, then to Registered.