Creating a service interface

To create a service interface:

1. In the menu, go to the Infrastructure section.

   This opens the resource management page. By default, the Network resources tab is selected, which displays the table of SD-WAN and SDN controllers.

2. Click Management → Configuration menu next to the controller to which the CPE device is connected.

   This opens the controller configuration menu. By default, you are taken to the Controller nodes section, which displays a table of controller nodes.

3. Go to the Service interfaces section.

   A table of service interfaces and ACL interfaces is displayed.

4. In the Switch and Port drop-down lists, select the CPE device and the OpenFlow port to which you want to map the service interface.
5. Click Create service interface.
6. This opens a window; in that window, in the Type drop-down list, select the type of traffic classification on the service interface:
   • Access (default).
   • VLAN If you select this option, in the VLAN ID field, enter the outer VLAN tag of the service interface. Range of values: 1 to 4094.
   • Q-in-Q If you select this iption, do the following:
     1. In the VLAN ID field, enter the outer VLAN tag of the service interface. Range of values: 1 to 4094.
     2. In the Inner VLAN ID field, enter the inner VLAN tag of the service interface. Range of values: 1 to 4094.
   • ACL is used when creating an ACL interface.
7. If necessary, enter a brief description of the service interface in the Description field.
8. Click Create.

The service interface is created and displayed in the table.