Step 7. Configuring a static network route

To configure a static network route:

1. In the IPv4 Routes window, select New and press ENTER.

   This opens the IPv4 Static Route window.

2. In the Address/Mask field, enter the IP address and mask of the subnet for which you want to configure the network route.
3. If you want to use the default network route, enter 0.0.0.0/0.
4. In the Gateway field, enter the IP address of the gateway.
5. Click Ok.
6. If you want to add other network routes, repeat the steps in the IPv4 Static Route window.
7. If you are done adding network routes, click Continue.

The Setup Wizard proceeds to the next step.