Adding, changing and removing static network routes

You can configure static network routes during installation of the Sandbox component.

You can also add, remove or change static network routes from the Sandbox web interface.

To add a static network route:

1. Select the Network interfaces section in the window of the Sandbox web interface.
2. In the Static routes settings group, click the Add button.

   A line with empty fields will be added in the list of static network routes.

3. In the IP field, enter the IP address of the server for which you want to configure a static network route.
4. In the Mask field, enter the subnet mask.
5. In the Gateway field, enter the IP address of the gateway.
6. From the Interface list, select a network interface for which you want to add a static network route.
7. Click .
8. Click Apply in the lower part of the window.

To remove a static network route, proceed as follows:

1. Select the Network interfaces section in the window of the Sandbox web interface.
2. In the Static routes settings group in the line containing the static network route that you want to remove, click the button.
3. Click Apply in the lower part of the window.

To modify a static network route:

1. Select the Network interfaces section in the window of the Sandbox web interface.
2. In the Static routes settings group in the line containing the static network route that you want to change, click the button.

   The static network route line will become editable. You can change one or more parameters of a static network route.

3. In the IP field, change the IP address of the server for which you want to configure a static network route.
4. In the Mask field, change the subnet mask.
5. In the Gateway field, change the IP address of the gateway.
6. From the Interface list, select the network interface for which you are editing the network route.
7. Click .
8. Click Apply in the lower part of the window.