Filtering and searching hosts with the Endpoint Agent component by computer IP address

To filter or search for hosts with the Endpoint Agent component by IP address of the computer on which the application is installed:

1. Select the Endpoint Agents section in the window of the application web interface.

   This opens the table of hosts.

2. Click the IP link to open the filter configuration window.
3. In the drop-down list, select one of the following filtering operators:
   • Contain
   • Not contain
4. In the entry field, specify one or several characters of the computer IP address. You can enter the IP address or subnet mask in IPv4 format (for example, 192.0.0.1 or 192.0.0.0/16).
5. To add a filter condition using a different criterion, click and specify the filter condition.
6. If you want to delete the filter condition, click the button to the right of the field.
7. Click Apply.

The filter configuration window closes.

The table displays only those hosts that match the filter criteria you have set.

You can use multiple filters at the same time.